Last Updated: Friday, June 06, 2008
PRODUCT LISTS Supreme Bidet Seat Prestige Bidet Seat Ultimate Bidet Seat Universal Bidet Premium Bidet Seat Duo Bidet Envie Bidet Simplet Bidet
Bidet Products
Supreme BB-1000 Bidet Seat
Bidet Manuals & Download Center
BB-1000 Supreme Bidet Owner's Manual Quick Guide Digital Brochure Measurement Specification Control Panel Functions
Inquiry on Bidet Products & Distributorships
2. CAUTIONS BEFORE INSTALLATION NOTE THE FOLLOWING IMPORTANT POINTS
Do not install in a location where Bio Bidet BB-500 may be exposed to water, excessive moisture, or condensation formation. To avoid damage to electronic components by high humidity, provide adequate ventilation by opening a window and/or a door when bathing. Use a water supply of 0.5kgf/cm2 to7.5kgf/cm2 Connect to portable water source. The water remaining in the unit may sometimes freeze during storage in winter. Make arrangements to prevent the hoses from freezing. If freezing occurs, warm the unit in room temperature before installation. The thermal protector in the water tank may sometimes trip during storage or transpiration in warm weather, casing non-operation. If this occurs, cool the unit in room temperature before installation. The rated power voltage is 120V AC, 60Hz and the rated power consumption is 630W. Use wiring and electrical outlet appropriate for this level of power. Do not supply electrical power to the unit unless the plumbing work has been completed. Damage could result.
GROUND INSTRUCTIONS.
The electrical outlet, which must be a 120V-60Hz and at least a 10Amp grounded outlet, should be located on the wall within reach of Bio Bidet BB-500 power cord. Always use a three-prong grounded outlet. If you have only a standard two-prong outlet, it must be replaced by a properly grounded three-prong outlet. A personal protection Residual Current Device (R.C.D) must be installed in the circuit supplying power to Bio Bidet BB-500/ If an extension cord is needed, only use an extension cord that has a three-prong grounded plug and a three-slot receptor that will accept the unit's three-prong plug. The electrical rating of the extension cord must be equal at or greater than the electrical rating of Bio Bidet BB-500. FAILURE TO FOLLOW THESE GROUNDING INSTRUCTIONS MAY CAUSE ELECTRICAL SHOCK, FIRE, SERIOUS PERSONAL INJURY, OR DAMAGE TO THE BIO BIDET BB-500. BB-300 Operating & Installation Instructions - Contents Important Safeguards : Cautions Before Installation : Parts Identification : Installation : Before Operation : Trial Operation : Operation : Maintenance : Specifications
The
