Previous Page
Next Page
8. Maintenance
Bio Bidet BB-300 will not operate properly if the strainer is clogged.
Be sure to clean the strainer.
- Close the shutoff valve.
- Flush the toilet to empty the flush tank.
- Unscrew the nut (A).
- Clean the strainer using a small brush.
- Re-screw the nut (A).
- Open shutoff valve.
2. Clean the nozzle
- Pull down the nozzle fro the nozzle plate by hand.
- If the nozzle is clogged, clean it using a pin.
3. Water draining from water tank
- Turn the shutoff valve (A) clockwise to close.
- Loosen the drain (B) at the button of the water tank to drain the
water. Be sure to place a pan large enough to contain the drained
water.
- After draining, securely tighten the plug (B).
- To re-supply water after draining, open the shutoff valve (A).
Previous Page
Next Page
BB-300 Operating & Installation Instructions - Contents
Important Safeguards :
Cautions Before Installation :
Parts Identification :
Installation :
Before Operation :
Trial Operation :
Operation :
Maintenance :
Specifications
|
The
