Previous Page
Next Page
9. MAINTENANCE
1. CLEANING THE STRAINER
-
 Bio
Bidet BB-500 will not operate properly if the strainer is clogged. Be
sure to clean the strainer before use.
- Close the shutoff valve.
- Flush the toilet to empty the water reservoir.
- Unscrew the nut (A).
- Clean the strainer by using a small brush.
- Re-screw the nut (A).
- Open the shutoff valve.
2. CLEANING THE NOZZLE
-
 When
the cleaning switch is pressed, the nozzle sticks out.
- The nozzle can be cleaned by using a tooth brush.
- After cleaning the nozzle, push the cleaning switch once again,
then the nozzle retracts itself with self cleaning.
3. WATER DRAINING FROM WATER TANK
-
 Close
the shutoff valve.
- Press the drain lever until the water is completely drained from
the unit's water tank.
- To re-supply water after draining, open the shutoff valve.
CAUTIONS:
- Do not drink the drained water.
- Do not insert finger into the drain hole.
- Before draining, unplug the power cord and wait 30 minutes until
the Bio Bidet BB-500 has cooled down.
Previous Page
Next Page
BB-500 Operating and Installation Instructions - Contents
Safeguards :
Grounding :
Precautions :
Parts Identification :
Installation Instructions
Before Operation :
Trial Operation :
Operation :
Maintenance :
Trouble Shooting
Specifications
|
The
