Previous Page
Next Page
10. TROUBLE SHOOTING
|
Problem |
Cause |
Remedy |
|
The
washing water is not sprayed. |
* The water tank is not filled.
* Timed operation
stopped after one minute continuous use.
* The shutoff valve
is closed.
* Freezing inside
the main unit or the water supply pipe. |
* Wait about one minute.
* Press the desired washing
switch once again.
* Turn on the
shutoff valve to
open.
* Heat the room
(for about two
hours). Operating the unit
while parts are frozen will
cause a malfunction.
|
|
The
washing water is not warm. |
* The water temperature switch
is set to LO.
* Continuous operation has
depleted the supply of warm
water.
|
* Press water to HI;
it will take
about ten minutes for the water
to reach the set temperature.
* Wait about ten minutes. |
|
The
washing water pressure is weak. |
* The water pressure level is
set to LO
* The strainer is clogged.
|
* Press the HI.
* Clean the strainer. |
|
The warm
seat is not warm. |
* The seat temperature is set to
LO
|
* Press the seat
switch toward
HI; it will take about 20 minutes
for the seat to reach the set
temperature.
|
|
The
drying air is not warm. |
* The dry temperature
is set to
LO.
|
* Press the HI. |
|
The unit
is not operating. |
* The seat is misaligned to the
toilet.
|
* Align the seat to the toilet. |
Previous Page
Next Page
BB-500 Operating and Installation Instructions - Contents
Safeguards :
Grounding :
Precautions :
Parts Identification :
Installation Instructions
Before Operation :
Trial Operation :
Operation :
Maintenance :
Trouble Shooting
Specifications
|
The
