Previous Page
Next Page
PRECAUTIONS
Do not install in a location where water might be splashed on the
product or in a location exposed to excessive moisture that condensation
forms on the Bio Bidet BB-500 surface.
To avoid damage to electronic components due to high levels of humidity,
provide adequate ventilation opening a window and/or door when bathing.
Use a water supply having a water pressure of 7.5 ~ 90 psi.
Connect the product to a pipe carrying potable water. Do not connect to
an industrial water line of water supply that does not carry water of
drinking quality.
In areas where water freezes in pipes in winter, make arrangements to
keep the pipes warm.. The remaining water in the unit may sometimes
freeze during storage in winter.
The thermal protector in the water tank may sometimes trip during
storage or transportation in hot weather, causing non-operation. In such
case, cool the unit before installation.
Do not supply electrical power to the unit until the plumbing
installation work has been completed. It could cause malfunction.
If unit is not operated for an extended period of time, unplug the unit.
Drain off water from Bio Bidet BB-500 if it is not going to be used for
an extended period of time.
Do not expose Bio Bidet BB-500 to direct sunlight, as it may discolor
the plastic.
Do not plug Bio Bidet BB-500 into a loose electric outlet.
Do not push or pull the connecting tube; it may cause water leakage.
Do not apply excessive force to the shower nozzle..
Previous Page
Next Page
BB-500 Operating and Installation Instructions - Contents
Safeguards :
Grounding :
Precautions :
Parts Identification :
Installation Instructions
Before Operation :
Trial Operation :
Operation :
Maintenance :
Trouble Shooting
Specifications
|
