8. OPERATION

- STOP
Press this switch to stop cleansing, bit or dry.
- WASH (BACK).
When this switch is pressed, water states cleansing the back side for
one minute. The nozzle moves back and forth automatically and the
nozzle stops moving when the switch is pressed again.
- WASH (FR).
When this switch is pressed, water start cleansing the front side for
one minute. The move function is same as cleansing.
- DRY.
When this switch is pressed, warm air comes out from dry outlet for
three minutes.
- WATER AND SEAT TEMPERATURE ADJUSTMENT.
The temperatures of water and seat are adjustable to the desired level
by pressing WATER TEMP or SEAT WARMTH switch.
- WATER PRESSURE AND DRY TEMPERATURE ADJUSTMENT.
Water pressure and dry temperature are adjustable to the desired level
by pressing HI or LO switch.
- NOZZLE POSITION ADJUSTMENT.
Nozzle position is adjustable to the desired position by pressing FR
or BK switch.
- NOZZLE CLEANING.
When this switch is pressed, the nozzle sticks out, so the nozzle can
be cleaned. The nozzle retracts itself when this switch is pressed
again.
- ON/OFF SWITCH.
Turn this switch on to activate the whole main unit operations.
- SEAT SWITCH.
Even if each control switch is pressed, the unit will not operate when
nobody sits on the seat.
BB-500 Operating and Installation Instructions - Contents
Safeguards :
Grounding :
Precautions :
Parts Identification :
Installation Instructions
Before Operation :
Trial Operation :
Operation :
Maintenance :
Trouble Shooting
Specifications
|